Seca mVSA 535 - Enabling VNC Access

Factory settings • 193
English
17-10-05-353-002g_10-2020 B
5. Connect a USB memory stick to the monitor.
6. Press the Export system log button.
The system log/audit trail is exported.
NOTE
If you have selected Network as the export destination, the system log
in the installation directory of the
seca analytics 115 PC software
(server or standalone PC) will be exported to the Program-
Data\seca\LogExports folder.
7.5 Enabling VNC access
With a VNC connection, you can reproduce the user interface of the device
on a PC screen and remotely control the device from the PC. The require-
ment is that a VNC viewer is installed on the PC.
1. Press the Reset tab.
2. Press the VNC access checkbox.
3. Restart the device.
The VNC service of the device will be started.
4. Set up the VNC connection using the VNC viewer of your PC.