Operation • 43
English
17-10-05-353-002g_10-2020 B
Logging out/switching user ► Press the Logout button.
You will be logged out.
The login window is displayed.
Another user can log in ➔ Logging in.
Saving power/switching off
1. Briefly press the ON/OFF button of the monitor.
2. The Save energy dialog window appears.
3. Select an option in accordance with the table:
NOTE
The device automatically switches to standby/shuts down if it is not
used for an extended period (phased by idle time)
Idle time button Device characteristics To remove setting
Screen off
• Display switches off
• The LED of the ON/OFF button is white.
• The measuring mat – if present – stays switched on
• Entries are retained
• User remains logged in
• Patient file remains active
• Measurements continue to run
Press screen
Standby
10 minutes
• Display switches off.
• The LED of the ON/OFF button is green
• Data which have not been saved are lost
• User is logged out
• Patient file is deactivated
• The measuring mat – if there is one – switches off
Press screen
To Next Page
Loading...
