Seca mVSA 535 - For Administrators: Configuring; Seca Mvsa 535;Seca Mbca 525; Preparing Configuration; Administrator Login

Preparing configuration • 135
English
17-10-05-353-002g_10-2020 B
FOR ADMINISTRATORS: CONFIGURING seca mVSA 535 /
seca mBCA 525
English
NOTE
This document describes the maximal equipment of the
secamVSA 535/seca mBCA 525 product family: measurement of
blood pressure, temperature, oxygen saturation and bioimpedance.
Depending on the actual equipment of your device, some of this infor-
mation may not be relevant to your device. Pay attention to the infor-
mation in this document which is relevant to your device.
NOTE
• This part of the user documentation contains information about con-
figuring the device for measuring mode and for integrating it in a net-
work.
• Integrating this device in a network containing other devices may
lead to previously unknown risks to patients, operators or third par-
ties. It is the responsibility of the operating company to determine,
analyze, evaluate, and control these risks.
• The functions described in this part of the user documentation are
accessible only to users with administrator rights.
• Follow the information in the instructions for use ➔ Instructions for
use for seca mVSA 535/seca mBCA 525.
1. PREPARING CONFIGURATION
1.1 Administrator login
NOTICE!
Faulty configuration
For devices with bioimpedance measurement: During configuration,
data are transmitted to the measuring mat via the infrared interface.
The infrared interface is located in the magnetic catch of the monitor.
► Ensure that the measuring mat is correctly suspended in the mag-
netic catch of the monitor throughout the entire configuration pro-
cess ➔ Suspending the measuring mat in the magnetic catch.
1. Switch on the device.
The measuring mat – if there is one – switches on automatically.
2. Log in as the administrator:
► Initial login: ➔ Activating initial user accounts
► Log in routinely: continue at step 3.
➔ Preparing configuration ➔ Setting up peripherals
➔ User accounts ➔ Connecting to an EMR system
➔ Making settings for measuring
mode
➔ Factory settings
➔ Managing system components ➔ Instructions for use for
seca mVSA 535/seca mBCA 525
➔ Administrator login
➔ Configuration options