Seca mVSA 535 - Initial Login; Configuration Options

40 • secamVSA 535/seca mBCA 525
17-10-05-353-002g_10-2020 B
5.6 Initial login
The following user accounts are available on the device initially:
• Admin: Configure and manage device
• User: Perform and manage measurements
• Service: For authorized service technicians
On initial login, these user accounts must be activated and configured.
Additional user accounts can only be set up in the
seca analytics 115 PC
software and must be synchronized with the device.
Further information is available here: ➔ For administrators: Configuring
seca mVSA 535 /seca mBCA 525\ ➔ User accounts
5.7 Configuration options
The device can only be configured by users with administrator rights. Further
information is available here: ➔ For administrators: Configuring
seca mVSA 535 /seca mBCA 525