Seca mVSA 535 - Connecting the Masimo SET Spo Sensor

36 • secamVSA 535/seca mBCA 525
17-10-05-353-002g_10-2020 B
2. Put the connector for the SpO
2
sensor/the patient cable in the socket on
the SmartBucket until you feel the connector engage.
NOTE
The holder above the SpO
2
connection is for storing the SpO
2
sensor.
Connecting the Masimo SET
®
SpO
2
sensor
NOTICE!
Damage to device, malfunction
The SpO
2
sensor must be compatible with the SpO
2
measuring
equipment fitted.
► Ensure that the SpO
2
sensor is compatible with the SpO
2
measuring
equipment fitted in your device ➔ Optional accessories and spare
parts.
► Follow the user documentation from the sensor manufacturer.
1. If necessary, connect a patient cable to the SpO
2
sensor as described in
the user documentation from the sensor manufacturer.
2. Put the connector for the SpO
2
sensor/the patient cable in the socket on
the SmartBucket until you feel the connector engage.
NOTE
The holder above the SpO
2
connection is for storing the SpO
2
sensor.
Click!
=>=>
Press!
=>=>