Description of device • 9
English
17-10-05-353-002g_10-2020 B
• seca 360° proximity connection: Receiving weight and height from
scales and measuring rods with an internal interface module or a
seca 452 external interface module
Monitor and measuring mat – if there is one – communicate with each other
via a WiFi direct connection or via an infrared interface.
Measuring results for the parameters blood pressure, body temperature,
pulse rate and oxygen saturation are transmitted from the SmartBucket to the
monitor via a USB connection.
The device has a
seca 360° wireless module and can receive measuring
results from compatible seca scales and measuring rods.
Compatibility seca analytics 115 PC software
This device (software version 1.0, Build 1163 or higher) is only compatible
with version 1.4 (Build 6657 or higher) of the
seca analytics 115 PC software.
There is no downward compatibility with older versions of
seca analytics 115.
seca connect 103 software
This device (software version 1.0, Build 1163 or higher) is only compatible
with version 2.2 or higher of the
seca connect 103 software. There is no
downward compatibility with older versions of the
seca connect 103 software.
Internal interface module/
seca 452 interface module
This device (software version 1.0, Build 1163 or higher) is only compatible
with interface modules on which firmware version Q2_2020_Build_615 or
higher is installed.
seca mVSA 526 SmartBucket
medical Body Composition Analyzer
seca mBCA 525 from serial number
10000000090505 can be retrofitted with the SmartBucket
seca mVSA 526
(accessory kit for measuring vital signs).
To Next Page
Loading...
