Operation when connected to an EMR system • 91
English
17-10-05-353-002g_10-2020 B
7. OPERATION WHEN CONNECTED TO AN EMR SYSTEM
Your administrator can set up the device so that it communicates with your
EMR system. In this case, the following additional functions are available:
• Log in with EMR user ID
• Call up patient data from EMR system on the device
• Submit measuring results to the EMR system
NOTICE!
Faulty operation, implausible measuring results
► Connection of the device to your EMR system is based on the tech-
nical and regulatory situation in your institution. In the individual
case, this may lead to the device behaving differently to the way de-
scribed in these instructions for use. If you have any questions, con-
tact your administrator.
► The Measure bioimpedance function is not available if the device is
connected to an EMR system.
7.1 Switching on the device
NOTE
To prevent faulty input, we recommend entering IDs with the aid of a
barcode scanner; information about compatible barcode scanners
can be found here: ➔ Optional accessories and spare parts.
1. Ensure that a barcode scanner is connected to the free USB interface of
the device.
2. Press the ON/OFF button of the monitor.
The LED of the ON/OFF button is white.
3. Wait until the Vital signs tab is displayed:
You have the following options for continuing:
► ➔ Measuring with an active connection to an EMR system
► ➔ Measuring with an interrupted connection to an EMR system
➔ Switching on the device
➔ Measuring
➔ Logging in with EMR user ID
➔ Calling up patient data from the EMR system
➔ Saving measurements in the EMR system
To Next Page
Loading...
