Seca mVSA 535 - Deleting User Accounts

User accounts • 141
English
17-10-05-353-002g_10-2020 B
NOTICE!
Data access by unauthorized persons
An insecure password may allow unauthorized persons to access
patient data or device settings.
► Select a password to satisfy your institution's security requirements.
► Use the user accounts without password protection only for special
applications (e.g. configuring interfaces with EMR systems). seca
Service will be pleased to assist if you have any questions relating to
interface configuration.
NOTE
• Specification of the Assistance or Physician role is relevant for use
of the user account in the
seca analytics 115 PC software. Details
on this can be found in the administrator manual for the
seca analytics 115 PC software.
• The display language is specified for each user individually. If no user
is logged in, the user interface is displayed in the system language
➔ Making regional settings.
5. Ensure that the Password protected field is activated (default setting).
6. Press the Save button.
The changes will be saved.
The user account is synchronized with the
seca analytics 115 PC
software.
NOTE
If automatic synchronization is activated, changes you make to user
accounts on the device are automatically adopted in the
seca analytics 115 PC software ➔ Activating automatic
synchronization.
Deleting user accounts User accounts can only be deleted in the seca analytics 115 PC software.
For deletion to take effect on the device, it must be synchronized with the PC
software ➔ Activating automatic synchronization.