Seca mVSA 535 - Retrofitting the Measuring Mat (Seca Mvsa 535 Only)

Managing system components • 161
English
17-10-05-353-002g_10-2020 B
4.5 Retrofitting the measuring mat (secamVSA 535 only)
NOTICE!
Malfunction
If your device is connected to an EMR system, the Measure
bioimpedance function cannot be used.
► Do not retrofit a measuring mat.
► Ensure that the Measuring mat active checkbox is deactivated.
secamVSA 535 can be retrofitted with the seca mBCA 531 measuring mat
to perform bioimpedance measurements ➔ Optional accessories and spare
parts.
1. Start up the measuring mat as described in the corresponding assembly
instructions.
2. Activate the measuring mat in the device:
a) Press the System tab
b) Press the Measuring mat button
c) Activate the Measuring mat active checkbox
3. Follow the on-screen instructions.