Safety precautions • 13
English
17-10-05-353-002g_10-2020 B
Preventing electric shock WARNING!
Electric shock
► Set up devices which can be operated with the electricity supply so
that the power supply socket is within easy reach and the power
supply can be disconnected quickly.
► Ensure that your local power supply matches the details on the
device.
► Connect this device only to a power supply with a protective earth
facility.
► Do not connect the device to a power supply network if there is any
uncertainty about whether the protective earth is functioning. In this
case, use the device exclusively in rechargeable battery mode.
► Do not connect the device to sockets that are switched by an on/off
switch or a dimmer.
► Never touch the power supply cable with wet hands.
► Do not use extension cables or power strips.
► Make sure that cables are not pinched or damaged by sharp edges.
► Make sure that cables do not come into contact with hot objects.
► Do not operate the device at an altitude of more than 3000 m above
sea level.
Prevent injuries and infections WARNING!
Injury from falls
► Ensure that the device is positioned firmly and level.
► Route connecting cables (if present) in such a way that neither user
nor patient can trip over them.
WARNING!
Risk of infection
► Before and after every measurement, wash your hands to reduce
the risk of cross-contamination and nosocomial infections.
► Hygienically reprocess the device regularly as described in the
respective section in this document.
► Make sure that the patient has no infectious diseases.
► Make sure that the patient has no open wounds or infectious skin
alterations, which may come into contact with the device.
To Next Page
Loading...
