Setting up peripherals • 177
English
17-10-05-353-002g_10-2020 B
Setting up automatic export This function allows you to transmit measuring results to an EMR system
automatically. The export takes place as soon as data are generated or
amended on the device. To be able to use this function, an interface to the
seca analytics 115 PC software must be set up in your EMR system.
1. Establish which data format your EMR system accepts.
2. Press the Peripherals tab.
3. Press the seca connect button.
4. In the Connect Mode drop-down menu, select the option
seca analytics 115 TCP or seca analytics 115 UDP.
5. Press the button.
The seca analytics 115 configuration page is displayed.
6. Ensure that the Automatic synchronisation checkbox is activated.
7. Press the desired export format.
• Automatic export (CSV)
• Automatic export (EMR)
8. To adopt the settings, proceed as follows:
a) Press the button
b) Press the button
The settings are adopted.
9. Set up an interface to the
seca analytics 115 PC software in your EMR
system.
To Next Page
Loading...
