About this document • 5
English
17-10-05-353-002g_10-2020 B
INSTRUCTIONS FOR USE FOR seca mVSA 535/seca mBCA 525
English
Software version: 1.0 from Build 1163
Article number of this document: 17-10-05-353-002g_10-2020 B
1. ABOUT THIS DOCUMENT
NOTE
This document describes the maximal equipment of the
secamVSA 535/seca mBCA 525 product family: measurement of
blood pressure, temperature, oxygen saturation and bioimpedance.
Depending on the actual equipment of your device, some of this infor-
mation may not be relevant to your device. Pay attention to the infor-
mation in this document which is relevant to your device.
➔ About this document ➔ Servicing
➔ Description of device ➔ Troubleshooting
➔ Safety precautions ➔ Technical data
➔ Device overview ➔ Optional accessories and spare
parts
➔ Starting up the device ➔ Compatible seca products
➔ Operation ➔ Disposal
➔ Operation when connected to an
EMR system
➔ Warranty
➔ Hygiene treatment ➔ Declaration of conformity
➔ Function check ➔ For administrators: Configuring
seca mVSA 535 /
seca mBCA 525
Display conventions
Symbol Description
►
Handling instruction
1.
2.
Handling instructions which have to be performed in
the specified sequence
a)
b)
Steps of a handling instruction which have to be
performed in the specified sequence
•
•
First level of a list
–
–
Second level of a list
Indicates points on the device or on device
components which require particular attention
Indicates areas on the display which require particular
attention
Indicates directions in overview graphics
Correct handling method
Correct handling result
Incorrect handling method
Incorrect handling result
To Next Page
Loading...
