Seca mVSA 535 - Measuring Mat Controls (Bioimpedance Analysis)

Device overview • 19
English
17-10-05-353-002g_10-2020 B
4.3 Measuring mat controls (bioimpedance analysis)
medical Body Composition Analyzer
A
B
C
D
E
F
G H
L
M
J
I
K
No. Control Function
A
LEDs, electrodes on left
LED green: Electrode contact good
LED green, flashing: Measurement in progress
LED red: Electrode contact poor
B
Button with LED,
patient position left
Enter patient position
LED green: seca patient file loaded, patient position selected
LED green, flashing: Measurement stopped
LED red: No seca patient file loaded
C
Start button Start measurement
D, K
Magnetic catch Fold up measuring mat for transport/storage
E
Button with LED,
patient position right
Enter patient position
LED green: seca patient file loaded, patient position selected
LED green, flashing: Measurement stopped
LED red: No seca patient file loaded
F
LEDs, electrodes on right
LED green: Electrode contact good
LED green, flashing: Measurement in progress
LED red: Electrode contact poor
G
LED, WiFi
LED green: WiFi connection to monitor OK
LED green, flashing: WiFi connection being set up
LED red: No WiFi connection to monitor
LED off: WiFi deactivated
H
LED, charge status
LED green: Rechargeable battery full
LED green, flashing: Rechargeable battery almost discharged, charge as
soon as possible
LED red: Rechargeable battery discharged
I
Electrode connections Connect to electrodes
J
Electrode cables Transmit signals from electrodes to the measuring mat
L
Infrared interface
Automatic data transmission: Monitor/measuring mat
Alternative if no WiFi available
M
Inductive charging interface
with magnetic catch
Charge measuring mat rechargeable battery