66 • secamVSA 535/seca mBCA 525
17-10-05-353-002g_10-2020 B
4. Enter body temperature:
a) Enter the value
b) Press the button: Confirm entry
The value entered appears in the TEMP field of the Vital signs tab.
You have the following options for continuing:
► Measure more vital signs ➔ Measuring vital signs
► Measure bioimpedance ➔ Measuring bioimpedance
► Stop the measurement procedure ➔ Stopping a measurement
procedure
Reading off pulse rate
WARNING!
Patient hazard, incorrect measurement
A pulse rate determined on the basis of blood pressure or oxygen
saturation is susceptible to artifacts.
► To obtain an exact value, determine pulse rate by means of ECG or
palpation.
Depending on device configuration, pulse rate is determined on the basis of
blood pressure or oxygen saturation.
Pulse rate is displayed until you stop the measurement procedure
➔ Stopping a measurement procedure.
Interrogate pulse rate source
1. Press the PR field.
The PR settings dialog window opens.
The source of the pulse rate (NIBP or SpO
2
) is displayed.
2. Press the Confirm button.
The dialog window closes.
➔ Interrogate pulse rate source
➔ Modifying presets (seca measuring equipment only)
To Next Page
Loading...
