60 • secamVSA 535/seca mBCA 525
17-10-05-353-002g_10-2020 B
6. Push the temperature probe into the probe holder completely.
You have the following options for continuing:
► Measure further vital signs ➔ Measuring vital signs
► Measure bioimpedance ➔ Measuring bioimpedance
► Stop the measurement procedure ➔ Stopping a measurement
procedure
Modifying presets
NOTE
Your settings apply to the current measurement procedure. If you
stop the measurement procedure ➔ Stopping a measurement proce-
dure, the presets defined by the administrator become active again.
1. Ensure that the temperature probe is pushed into the probe holder
completely.
2. Press the TEMP field.
The Temperature settings dialog window opens.
The presets are displayed.
3. Press the desired measurement method.
• Predictive
• Direct
4. Press the Confirm button.
The dialog window closes.
The modified settings are adopted.
5. Start the temperature measurement as described in the section entitled
➔ Starting a rectal temperature measurement.
To Next Page
Loading...
