Cirklon Sequencer User Manual
When enabled, the record FTS option will apply the current Force-to-scale settings to
incoming notes as they are recorded into the pattern.
Finally, the “loop” option allows you to adjust the bar length of a CK pattern without having
to go into pattern edit.
Two further things to note about CK pattern record:
If you enable record mode while the sequencer is not running, it will automatically start on
receiving the first incoming note.
While record is active, the DELETE key can be used to mute existing notes in the pattern as
they play.
CK ‘Tap’ Note Entry
While record mode is active in the CK pattern edit mode, you can use the SCULPT key to
enter new notes on the current row at the current playback position. The velocity of the new
notes is set by the position of knob A and their length is set by the duration of the keypress.
To Next Page
Loading...
