Cirklon Sequencer User Manual
The flashing cursor at the end of the song name, and the visual representation of the step keys
and encoders at the bottom of the display show you are in text input mode.
All track key, encoder and lower LEDs also light up in this mode.
In text input mode, you can enter or edit the name using the keys and encoders.
The character on each key is shown in the visual aid.
Press DELETE to delete the character before the cursor.
Hold the SHIFT key to enter upper case letters.
Pressing the ROW encoder toggles between letters and numbers ā the visual aid will switch
accordingly.
You can move the cursor within the text by turning the VALUE encoder.
When the cursor is within existing text, the INSERT key will switch between new characters
being inserted into, or over-writing the text.
To confirm the edited text, press ENTER (the VALUE encoder).
To exit without affecting the stored name, press the MENU key.
This mode of text entry is used for naming a number of objects, such as songs, scenes,
patterns and instruments.
To Next Page
Loading...
