Figure 55: Configuration
1
Device Catalog
2
Device tile
7.2.6.1 Device Catalog
The Device Catalog contains all available devices.
•
T
he Device catalog tab contains the devices installed in Safety Designer.
•
The Device search tab contains the devices found during a device search.
The devices from the device catalog can be compiled in a project in the working area.
b
Dr
ag a device into the working area using drag and drop.
Or:
b
Double-click on a device in the device catalog.
10)
✓
The device is shown as a tile in the working area.
7.2.6.2 Open the device window – configure devices
Open a device window to configure a device, perform diagnostics, or create reports. You
ha
ve the following options:
b
Click on the Device tile.
Or:
b
Open t
he tile menu and choose Configure.
✓
The device window opens.
10)
10)
W
hen a device is configured offline for the first time, the device selection assistant opens. This is where you select the type of device to
be configured.
7 C
ONFIGURATION
78
O P E R A T I N G I N S T R U C T I O N S | microScan3 – EFI-pro 8021913/15ZW/2019-11-14 | SICK
Subject to change without notice
To Next Page
Loading...
