SICK microScan3 - EFI-pro User Manual

Display Reference Contour Field
Y
ou determine whether the reference contour field is displayed.
Drawing area
You can use a Cartesian or a polar coordinates system and select the colors for the grid
and the drawing area.
b
Choose the option Cartesian.
✓
The coordinates system is shown as a Cartesian coordinates system.
b
Choose the option Polar.
✓
The coordinates system is shown as a polar coordinates system.
b
Select Color of grid.
✓
The field editor’s grid is displayed in the chosen color.
b
Select Color of drawing area.
✓
The field editor’s drawing area is displayed in the chosen color.
7.10.6 Editing fields using coordinates
You can use coordinates to edit fields. Depending on the form on which a field is based,
t
he appropriate input fields are displayed. The example shows a dialog box for a rectan‐
gle.
CONFIGURATION 7
8021913/15ZW/2019-11-14 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 – EFI-pro
99
Subject to change without notice

SICK microScan3 - EFI-pro Specifications

General

Scanning angle	275°
Number of fields	Up to 128
Number of monitoring cases	Up to 128
Enclosure rating	IP65, IP67
Number of protective fields	Up to 128
Field sets	Up to 128
Protective field range	5.5 m
Resolution	30 mm / 40 mm / 50 mm / 70 mm / 150 mm
Interface	Ethernet/IP, PROFINET
Ambient operating temperature	0 °C ... +50 °C
Scanning range	5.5 m (protective)
Safety integrity level	SIL3 (IEC 61508)
Performance level	PL e (ISO 13849)
Type	Type 3
Detection capability	30 mm
Operating voltage	19.2 V DC to 30 V DC
Ambient temperature	0°C to +50°C
Storage temperature	-25 °C ... +70 °C
Housing material	Aluminum
Connection	M12 connector
Safety standards	IEC 61496-1, IEC 61508, ISO 13849