SICK microScan3 - EFI-pro User Manual

1 About this document
1.1 Function of this document
These operating instructions contain the information needed during the life cycle of the
s
afety laser scanner.
Operating instructions of the safety laser scanner must be made available to all people
who work with the device.
Read the operating instructions carefully and ensure that you have understood the con‐
tents completely before you work with the safety laser scanner.
1.2 Scope
The operating instructions apply to the microScan3 safety laser scanner with the follow‐
in
g type label entry in the Operating Instructions field:
•
8021911
This document is included with the following SICK part numbers (this document in all
available language versions):
•
8021911
1.3 Target groups of these operating instructions
Some chapters of these operating instructions are intended for certain target groups.
Ho
wever, the entire operating instructions are relevant for intended use of the product.
Table 1: Target groups and selected chapters of these operating instructions
Target group Chapter of these operating instructions
Project developers (planners, developers,
de
signers)
"Project planning", page 25
"Configuration", page 74
"Technical data", page 151
"Accessories", page 170
Installers "Mounting", page 63
Electricians "Electrical installation", page 71
Safety experts (such as CE authorized repre‐
sent
atives, compliance officers, people who
test and approve the application)
"Project planning", page 25
"Configuration", page 74
"Commissioning", page 117
"Technical data", page 151
"Checklist for initial commissioning and com‐
missioning", page 182
Operators "Operation", page 121
"T
roubleshooting", page 135
Maintenance personnel "Maintenance", page 128
"T
roubleshooting", page 135
1.4 Further information
www.sick.com
T
he following information is available via the Internet:
•
Further language versions of these operating instructions
•
Data sheets and application examples
•
CAD data of drawings and dimensional drawings
•
Certificates (such as the EU declaration of conformity)
1 A
BOUT THIS DOCUMENT
8
O P E R A T I N G I N S T R U C T I O N S | microScan3 – EFI-pro 8021913/15ZW/2019-11-14 | SICK
Subject to change without notice

SICK microScan3 - EFI-pro Specifications

General

Scanning angle	275°
Number of fields	Up to 128
Number of monitoring cases	Up to 128
Enclosure rating	IP65, IP67
Number of protective fields	Up to 128
Field sets	Up to 128
Protective field range	5.5 m
Resolution	30 mm / 40 mm / 50 mm / 70 mm / 150 mm
Interface	Ethernet/IP, PROFINET
Ambient operating temperature	0 °C ... +50 °C
Scanning range	5.5 m (protective)
Safety integrity level	SIL3 (IEC 61508)
Performance level	PL e (ISO 13849)
Type	Type 3
Detection capability	30 mm
Operating voltage	19.2 V DC to 30 V DC
Ambient temperature	0°C to +50°C
Storage temperature	-25 °C ... +70 °C
Housing material	Aluminum
Connection	M12 connector
Safety standards	IEC 61496-1, IEC 61508, ISO 13849