Siemens HydroRanger 200 HMI - Order Number (3.1.4.); Serial Number (3.1.5.); Hardware Revision (3.1.6.); Firmware Revision (3.1.7.)

Parameter reference
8.7 Maintenance and Diagnostics (3.)
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC
253
8.7.1.4
Order number (3.1.4.)
8.7.1.5
Serial number (3.1.5.)
Shows the unique factory-set serial number of the device. Read only.
8.7.1.6
Hardware revision (3.1.6.)
Shows to the electronics hardware of the device. Read only.
8.7.1.7
Firmware revision (3.1.7.)
Shows the sensor firmware revision value. Read only.
8.7.1.8
Loader revision (3.1.8.)
Shows the software revision value used to update the device. Read only.
8.7.1.9
Manufacture date (3.1.9.)
Displays the manufacture date of this unit. Read only.
Index
Global
Values
Format: YY:MM:DD (Read only)
Related
Power-ON resets (3.2.4.) (Page 255)
8.7.1.10
Date last configured (3.1.10.)
Shows the date when the device was last configured by SIMATIC PDM. Read only.
8.7.2
Diagnostics (3.2.)
8.7.2.1
Transducer selector (3.2.1.)
Sets the transducer index for all parameters applicable to this sub-menu.