Siemens HydroRanger 200 HMI - Technical data; Power; Programming; Outputs

HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC
295
Technical data
11
Note
Device specifications
Siemens make
s every attempt to ensure the accuracy of these specifications but reserves
the right to change them at any time.
Note
The device is to be used only in the manner outlined in this instruction manual or protection
provided by the
equipment may be impaired.
Note
Device-specific approvals
Always refer to nameplates on the device for device
-specific approvals.
11.1
Power
AC version
• 100 ... 230 V AC ± 15%, 50 / 60 Hz, 36 VA (17W)
1
• Fuse: F3: 2 AG, Slow Blow, 0.375 A, 250 V
DC version
• 12 ... 30 V DC, 20 W
1
• Fuse: F3: 2 AG, Slow Blow, 2A, 250 V
1
Power consumption is listed at maximum