Drive functions
7.3 Function modules
Function Manual
204 Function Manual, 01/2011, 6SL3097-4AB10-0BP3
7.3 Function modules
7.3.1 Function modules - Definition and commissioning
Description
A function module is a functional expansion of a drive project that can be activated during
commissioning.
Examples of function modules:
● Technology controller
● Setpoint channel
● Extended brake control
A function module generally has separate parameters and, in some cases, separate faults
and alarms too. These parameters and messages are only displayed when the function
module is active. An active function module also generally requires additional processing
time, which must be taken into account during configuration.
Commissioning with STARTER
In the STARTER commissioning screens, you can activate the function modules directly
(e.g. technology controller) or indirectly (activating the basic positioner automatically
activates position control, for example).
Commissioning via parameter (only with BOP20)
The function modules can be activated/deactivated using parameter p0108 of the Control
Unit (CU). The READY LED on the main component of the drive object can be made to flash
by means of parameter p0124 (CU).
Overview of important parameters (see SINAMICS S110 List Manual)
● p0108 Drive objects, function module
● p0124 Identifying the main components using LEDs
To Next Page
Loading...
