Drive functions
7.1 Servo control
Function Manual
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
175
7.1.16 Vertical axes
Description
With a vertical axis without mechanical weight compensation, electronic weight
compensation can be set by offsetting the torque limits (p1532). The torque limits specified in
p1520 and p1521 are shifted by this offset value.
The offset value can be read in r0031 and transferred in p1532.
To reduce compensation once the brake has been released, the torque offset can be
interconnected as a supplementary torque setpoint (p1513). In this way, the holding torque is
set as soon as the brake has been released.
Function diagrams (see SINAMICS S110 List Manual)
● 5060 Torque setpoint, control type switchover
● 5620 Motor/generator torque limit
● 5630 Upper/lower torque limit
Overview of important parameters (see SINAMICS S110 List Manual)
● r0031 Actual torque smoothed
● p1513 CI: Supplementary torque 2
● p1520 CO: Torque limit, upper/motoring
● p1521 CO: Torque limit, lower/regenerative
● p1532 CO: Torque limit, offset
To Next Page
Loading...
