Function Manual
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
21
General information for commissioning
1
1.1 Explanations regarding the STARTER user interface
Use STARTER to create your sample project. The different areas of the user interface are
used for different configuration tasks (refer to diagram below):
● Project navigator (area
①): this area displays the elements and objects that can be
added to your project.
● Working area (area
②): you create the project in this area:
– When you are configuring the drive, this area contains the Wizards that help you
configure the drive objects.
– When you configure, for example, the parameters for the speed setpoint filter
– When you call up the expert list, the system displays a list of all the parameters that
you can view or change.
● Detail view (area
③): This area provides detailed information on faults and warnings, for
example.
To Next Page
Loading...
