Siemens SINAMICS S110 - Searching for a Drive Unit Online

Commissioning with PROFIBUS
3.4 Creating a project in STARTER
Function Manual
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
55
3.4.2 Searching for a drive unit online
To search for a drive unit online, the drive unit and the PG/PC must be connected via
PROFIBUS.
Table 3- 3 Sequence for searching for a drive unit in STARTER (example)
What to do? How to do it?
Operator action:
Menu: "Project" → New with Wizard
Click "Find drive unit online".
1. Create a new
project
Project name: Project_1 (can be freely selected)
Author: Any
Remark: Any
1.1 Enter the project
data.
2. Set up the PG/PC Here, you can set up the PG/PC interface by clicking "Change and test".