Siemens SINAMICS S110 - Suppression Bandwidths and Setpoint Limits

Drive functions
7.3 Function modules
Function Manual
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
281
Parameterization with STARTER
The "speed setpoint" parameter screen is selected via the following icon in the toolbar of the
STARTER commissioning tool:
7.3.7.8 Suppression bandwidths and setpoint limits
Description
In the range 0 U/min to setpoint speed, a drive train (e.g. motor, coupling, shaft, machine)
can have one or more points of resonance, which can result in vibrations. The suppression
bandwidths can be used to prevent operation in the resonance frequency range.
The limit speeds can be set via p1080[D] and p1082[D]. These limits can also be changed
during operation with the connectors p1085[C] and p1088[C].
6XSSUHVVLRQ
EDQGZLGWKV
6SHHGOLPLWLQJPD[
6SHHGOLPLWLQJPLQ
5DPSIXQFWLRQJHQHUDWRU
0RWRUFRQWURO
0LQ
0D[
U
S>'@

S>'@S>'@
S'@
S>'@
U

\
[
S
S>&@

S>'@
\
\
U
U
S
S>&@

[
[
\
[

S>'@
Figure 7-62 Suppression bandwidths, setpoint limitation
Function diagrams (see SINAMICS S110 List Manual)
● 1550 Setpoint channel
● 3050 Suppression bandwidth and speed limiting