Commissioning with PROFIBUS
3.4 Creating a project in STARTER
Function Manual
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
57
What to do? How to do it?
You have now created the project.
→ Click "Complete".
4. Summary
5. Configure the drive
unit.
Once you have created the project, you have to configure the drive unit. The "Example of first
commissioning using STARTER" chapter contains an example scenario.
3.4.3 Searching for nodes that can be accessed
To search for a drive unit online, the drive unit and the PG/PC must be connected via
PROFIBUS. The interface must be set correctly in STARTER.
To Next Page
Loading...
