Siemens SINAMICS S110 - 6 Parameterization Using the Basic Operator Panel 20; General Information about the BOP20

Function Manual
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
115
Parameterization using the Basic Operator Panel 20
6
6.1 General information about the BOP20
With the Basic Operator Panel 20 (BOP20), drives can be powered up and powered down
during the commissioning phase and parameters can be displayed and modified. Faults can
be diagnosed as well as acknowledged.
The BOP20 is snapped onto the Control Unit; to do this the dummy cover must be removed
(for additional information on mounting, please refer to the Equipment Manual).
Overview of displays and keys
'ULYH1R
6&3
581
Figure 6-1 Overview of displays and keys