Siemens SINAMICS S110 - Page 46

Commissioning preparations for PROFIBUS
2.4 Powering-up/powering-down the drive system
Function Manual
44 Function Manual, 01/2011, 6SL3097-4AB10-0BP3
Table 2- 4 Switch-in/switch-out status signal
Signal name Internal status word Parameter PROFdrive/Siemens
telegram 1 ... 111
Ready to start ZSWA.00
ZSWAE.00
r0899.0 ZSW1.0
Ready for operation ZSWA.01
ZSWAE.01
r0899.1 ZSW1.1
Operation enabled ZSWA.02
ZSWAE.02
r0899.2 ZSW1.2
Switching on inhibited ZSWA.06
ZSWAE.06
r0899.6 ZSW1.6
Pulses enabled ZSWA.11 r0899.11 ZSW1.11
1)
1)
Only Siemens telegrams 102 and 103
Function diagrams (see SINAMICS S110 List Manual)
● 2610 Sequence control - sequencer
● 2634 Missing enable signals, line contactor control