Basic information about the drive system
10.3 Working with the memory card
Function Manual
668 Function Manual, 01/2011, 6SL3097-4AB10-0BP3
● Automatic copying of the parameter data set with index 0 from the memory card when the
system is switched off/on:
Yes
Parameter backup
with index 0 to
memory card?
No
Use a memory card with
the desired
parameter
backup
Insert memory card
into CU305
Switch SINAMICS S110
off and on
again
Parameter backup
with setting 0 is
copied to
CU305
Log memory card
off (p9400 = 2)
and remove it
from CU305
Figure 10-5 Series commissioning
Alternatively, you can copy parameter sets from the memory card to the CU305 without
switching the CU305 off/on as follows:
To Next Page
Loading...
