Preface
Function Manual
6 Function Manual, 01/2011, 6SL3097-4AB10-0BP3
Note
The Equipment Manual describes a desired state which, if maintained, ensures the required
level of operational reliability and compliance with EMC limit values.
Should there be any deviation from the requirements in the Equipment Manual, appropriate
actions (e.g. measurements) must be taken to check/prove that the required level of
operational reliability and compliance with EMC limit values are ensured.
Spare parts
You can find spare parts on the Internet at:
http://support.automation.siemens.com/WW/view/de/16612315
Test certificates
The Safety Integrated functions of SINAMICS components are generally certified by
independent institutes. An up-to-date list of certified components is available on request from
your local Siemens office. If you have any questions relating to certifications that have not
been completed, please ask your Siemens contact.
To Next Page
Loading...
Need help?
General
