Siemens SITRANS TSinsert User Manual

3. Press the button.
4. Set the damping with the and buttons.
5. To set the damping in steps of 0.10 s, press and hold down the buttons.
6. Use the button to con󹪝rm.
8.3.11 Functional Safety [12]
Enables Functional Safety.
The parameter is only visible for devices with Functional Safety.
See also
Functional Safety Manual (https://www.siemens.com/processinstrumentation/documentation)
8.3.12 Loop test [13]
Sets a constant loop current for test purposes.
You have the option of selecting preset values or a user-de󹪝ned value.
Setting range: 3.55 mA
4 mA
12 mA
20 mA
22.8 mA
USER User de󹪝ned
Factory setting: 12 mA
8.3.12.1 Loop test with preset loop current value
1. Navigate into the parameter view.
Navigating in the views (Page 60)
2. Select the parameter "Loop test".
Parameter assignment
8.3 Parameter assignment over device with display
SITRANS TS100/TS200/TS300/TS500/TSinsert/TSthermowell
86 Operating Instructions, 08/2020, A5E47810090-AA

Siemens SITRANS TSinsert Specifications

General

Brand	Siemens
Model	SITRANS TSinsert
Category	Temperature Controller
Language	English