Siemens SITRANS TSinsert - Installing the SIPROM T Parameterization Software

6.3.2 Installing the SIPROM T parameterization software
Requirement
• PC with USB port and Windows 10 operating system
• Windows Microsoft .NET Framework 4.5 or higher for Windows 10
• USB modem present
Procedure
1. Download the SIPROM T parameter assignment software from the Internet free of charge.
(
http://www.siemens.com/processinstrumentation/downloads)
2. Uninstall the SIPROM T installations from your PC.
3. Before you start the installation, read the information for preparation in the Readme 󹪝le.
4. Double-click the "setup.exe" 󹪝le in the SIPROM T software directory.
5. Follow the installation instructions.
6. Download the following USB driver from the Internet: (http://www.ftdichip.com/
Drivers/CDM/CDM20830_Setup.exe)
7. Open the USB driver 󹪝le.
8. Install the downloaded USB driver.
Procedure
1. Open the SIPROM T Software directory > USB Driver.
2. Double-click the "CDM20830_Setup.exe" 󹪝le.
3. Follow the installation instructions.
Commissioning
6.3 Commissioning the USB modem and SIPROM T
SITRANS TS100/TS200/TS300/TS500/TSinsert/TSthermowell
Operating Instructions, 08/2020, A5E47810090-AA 55