Siemens SITRANS TSinsert User Manual

8.3.20 Minimum measured peak value at Input 2 [21]
Shows the minimum measured peak value at input 2.
Indication on the dis‐
play
MIN INPUT 2
8.3.21 Maximum measured peak value at Input 2 [22]
Shows the maximum measured peak value at input 2.
Indication on the dis‐
play
MAX INPUT 2
8.3.22 Minimum transmitter electronics temperature [23]
Shows the minimum measured transmitter electronics temperature.
Indication on the dis‐
play
MIN ETEMP
8.3.23 Maximum transmitter electronics temperature [24]
Shows the maximum measured transmitter electronics temperature.
Indication on the dis‐
play
MAX ETEMP
8.3.24 Button lock [25]
Enables the button lock. You can continue to operate the device using remote operation.
Setting range: ON Button lock enabled
OFF Button lock disabled
Factory setting: OFF
Parameter assignment
8.3 Parameter assignment over device with display
SITRANS TS100/TS200/TS300/TS500/TSinsert/TSthermowell
Operating Instructions, 08/2020, A5E47810090-AA 93

Siemens SITRANS TSinsert Specifications

General

Brand	Siemens
Model	SITRANS TSinsert
Category	Temperature Controller
Language	English