SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018 30
3. Click Next. The following page appears.
4. In the WAN Service Type field, accept the default of PPP over Ethernet (PPPoE).
5. (Optional) Modify the other fields, using the information in the following table.
Field Name Description
Enter Service Descrip-
tion
(Optional) Enter a name to describe this configuration.
Enter 802.1P Priority Enter the priority for this service. Options are 0 - 7. The default is 0.
For tagged service, enter values in this field and the 802.1Q VLAN ID field.
For untagged service, accept the defaults of -1 (disabled) in this field and the 802.1Q VLAN ID
field.
Enter 802.1Q VLAN ID Enter the VLAN ID for this service. Options are 0 - 4094. The default is -1 (disabled).
For tagged service, enter values in this field and the 802.1P Priority field.
For untagged service, accept the defaults of-1 (disabled) in this field and the 802.1P Priority
field.
To Next Page
Loading...
