SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018 42
6. Enter the relevant WAN IP Settings, using the information provided in the table below.
Field Name Description
Obtain an IP address auto-
matically
This option is selected by default. DHCP is enabled in MER mode. Click to prevent
the ISP automatically assigning the WAN IP to the gateway.
Option 50 Request IP Address Enter the IP address to be used when sending messages. If the specified address is
not available, the DHCP server assigns the next allowed IP address.
Option 51 Request Leased Time Enter the maximum lease time defined for the client. The default is zero (0).
Option 54 Request Server
Address
Enter the IP address of the source server.
Option 55 Request List Enter the configuration parameter numbers, separated by commas.
Option 58 Renewal Time Enter the number of hours before the DHCP client begins to renew its address
lease with the DHCP server.
Option 59 Rebinding Time Enter the number of hours before the DHCP client enters the rebinding state if it
has not renewed its current address lease with the DHCP server.
Option 60 Vendor ID (Optional) Enter the vendor ID to broadcast so the DHCP server can accept the
device.
Option 61 IAID (Optional) Enter the Interface Association Identifier (IAID). This is a unique iden-
tifier for an IA, chosen by the client.
Option 61 DUID (Optional) Enter the DHCP Unique Identifier (DUID) is used by the client to get an
IP address from the DHCP server.
Option 77 User ID (Optional) Enter the user class ID that should be used to filter traffic.
Option 125 (Optional) Select whether local devices can automatically receive DHCP options
from the server. The default is Disable.
Use the following Static IP
address
Click to manually declare the static IP information provided by your ISP. When you
select this option, you must enter the WAN IP address, subnet mask and gateway
IP address.
WAN IP Address (Available only when Static IP address is selected) Enter the static WAN IPV4
address.
WAN Subnet Mask (Available only when Static IP address is selected) Enter the static subnet mask.
WAN gateway IP Address (Available only when Static IP address is selected) Enter the static gateway IP
address.
Primary DNS Server (Available only when Static IP address is selected) (Optional) Enter the IP
address of the primary DNS server.
Secondary DNS Server (Available only when Static IP address is selected) (Optional) Enter the IP
address of the secondary DNS server.
To Next Page
Loading...
