309
SMA
Detection via the Solar-Log
™
WEB Interface
•
For detection on the Solar-Log
™
, select the device class under the menu Configuration | Device | Definition
| Interface
with the plus symbol and then select SMA as the manufacturer and Sunspec as the type. Confirm
your selection with
OK.
•
Save your selections and then start the Device Detection under Configuration | Device | Detection.
Detection from the Solar-Log 1200
•
When using the Solar-Log 1200, the detection can also be started from the display. Select the settings ►Start
► Initial Configuration ► Page 2 „Device“ ► Add and select the manufacturer „SMA: Sunspec Modbus“ from
there. Save and start the Device Detection.
To Next Page
Loading...