Solare Datensysteme Solar-Log - 5 Inepro; 5.1 Inepro 1250 D

420
Inepro
5 Inepro
5.1 Inepro1250D
Selections available under Inepro / DMM
Overview
•
The communication address cannot be freely assigned.
•
2-pin wiring.
•
Installation steps:
• Switch off the meter and the Solar-Log™.
• Connect the meter to the Solar-Log™.
Connect the meter to the Solar-Log™.
The wiring is done using a
•
self-made cable connection with a terminal block connector.
Cable connection via RS485:
Solar-Log™ RS485 terminal block Solar-Log 50 Inepro 1250D
Pin assignment Pin assignment
► 1 1 or 5 11 - RS485A
► 4 4 or 6 10 - RS485B
Possible meter operating modes for the Inepro meter 1250D via RS485:
•
Total plant meter
•
Sub-consumption meter
•
Consumption meter
•
Generator