501
WeMo Insight Switch
4 WeMoInsightSwitch
4.1 WeMoInsightSwitch
With the WeMo Insight Switch, home appliances and electronic devices can be connected to a Wi-Fi network, allo-
wing the devices to be remotely turned on and off. The Wemo Insight Switch can also monitor the devices and will
send information about the device’s energy usage directly to your smartphone or tablet. Follow the subsequent
instructions to be able to use these functions with the Solar-Log™.
Procedure:
1. Connect a desktop/laptop and the Solar-Log™ to the router with a LAN cable.
2. Download the WeMo app to your smartphone or tablet.
3. Reset the WeMo Insight Switch (press the reset button for 5 seconds while turning on the power for the WeMo
Insight Switch).
4. The WeMo searches for the smartphone or tablet via WiFi.
5. Start the WeMe app and connect the WeMo Insight Switch to the router‘s WiFi network.
6. Connect to the Solar-Log™‘s WEB interface with the desktop/laptop and go to the
Configuration | Devices |
Definition
menu.
7. Select the device class „Switch“ with the +plus button.
8. Select „Belkin“ as the manufacturer and „WeMo Insight“ as the type. Enter the number of devices and click on
save.
9. Then start the device detection from the
Configuration | Devices | Detection menu.
10. The connection is now established.
Note
A direct connection between the Solar-Log™ WiFi and WeMo is not possible. The Solar-Log™
has to be connected to a router via a LAN cable or to be in a network.
The last step is configuring the Smart Energy Logics. Refer to the Solar-Log ™ Smart Energy Manual for more
informatin. It is available from our website (http://www.solar-log.com/en/service-support/downloads/manuals/
current-product.html).
To Next Page
Loading...