390
Yaskawa
Connect the inverters to each other
The inverters are connected together using the RS485 interface. Refer to the manufacturer's inverter manual for
the details on how to setup the connection.
Allocate communication address
•
Recommendation: Continuous numbering starting with 1; highest possible address: 247.
•
Setting: Using the inverter operating display.
•
Procedure: Start according to the inverter's instructions.
Note
Please refer to the manufacturer's notes in regard to the addressing in the installation manual.
Note
A maximum of 31 inverters can be connected per RS485 bus.
To Next Page
Loading...