439
Schneider Electric
Possible meter operating modes for the Schneider EM6400S via RS485:
•
Battery meter (bi-directional)
•
Total plant meter
•
Sub-consumer
•
Consumption meter
•
Consumption meter (bi-directional)
•
Generator
Note
The meter cannot be connected to the inverters with a single bus.
For this reason, use one RS485 connection for the inverters and one RS485 connection for the meter.
Note
A maximum of 32 devices can be connected per bus.
Note:
Please refer to manufacturer's manual for information on the installation, wiring and configuration of
the device.
To Next Page
Loading...