494
Rainwise - PVMet™-200 (Weather station)
Note
The device has to be operate in Modbus mode (default) so that the PVMet™ 200 (weather station) can
communicate with the Solar-Log™. (Parameter settings according to the manufacturer‘s instructions).
Note
The bus address of the Rainwise PVMet™ 200 is set to 60 by default.
Note
Check and/or set the following parameters according to the manufacturer‘s instructions:
Baud rate: Baud rate 9600, Data bits: 8, Parity: none, Stop bits: 1.
Note
The maximum bus length is 1200 meters.
To Next Page
Loading...