132
S2 User Handbook
one and continue as before. To exit this setup procedure press and hold both the PGM and
AUD buttons as before for 2 seconds and the module will start operating
as normal.
Each button and their corresponding modes are listed below.
PGM
Mode 1 : Normal. The program bus can be selected as normal.
Mode 2 : Always on. The program bus is permanently selected.
Mode 3 : Always o. The program bus is permanently deselected.
Mode 4 : Mix. The program bus can be selected as normal but also allows this button to be
mixed with other buttons set to mix mode.
AUD
Mode 1 : Normal. The audition bus can be selected as normal.
Mode 2 : Always on. The audition bus is permanently selected.
Mode 3 : Always o. The audition bus is permanently deselected.
Mode 4 : Mix. The audition bus can be selected as normal but also allows this button to be
mixed with other buttons set to mix mode.
EXT1
Mode 1 : Normal. External input 1 can be selected as normal.
Mode 2 : Always on. External input 1 is permanently selected.
Mode 3 : Always o. External input 1 is permanently deselected.
Mode 4 : Mix. External input 1 can be selected as normal but also allows this button to be
mixed with other buttons set to mix mode.
EXT2
Mode 1 : Normal. External input 2 can be selected as normal.
Mode 2 : Always on. External input 2 is permanently selected.
Mode 3 : Always o. External input 2 is permanently deselected.
Mode 4 : Mix. External input 2 can be selected as normal but also allows this button to be
mixed with other buttons set to mix mode.
S2OMS STUDIO MONITOR CHANNEL
S2OMS STUDIO MONITOR CHANNEL
19