EasyManua.ls Logo

Sonifex S2 - Page 87

Sonifex S2
172 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
S2 User Handbook
75
Each button and their corresponding modes are listed below.
PGM
Mode 1 : Normal. The program bus can be selected as normal.
Mode 2 : Always on. The program bus is permanently selected.
Mode 3 : Always o. The program bus is permanently deselected.
AUD
Mode 1 : Normal. The audition bus can be selected as normal.
Mode 2 : Always on. The audition bus is permanently selected.
Mode 3 : Always o. The audition bus is permanently deselected.
Source Select
Mode 1 : Normal. The source can be selected and deselected as normal.
Mode 2 : Interlocking. The source can only be deselected by the selection of another source.
Mode 3 : Always o. The source is permanently deselected.
EQ
Mode 1 : Normal. Equalization can be enabled or disabled as normal.
Mode 2 : Always enabled. Equalization controls are permanently enabled.
Mode 3 : Always disabled. Equalization controls are permanently disabled.
Cue/PFL
Mode 1 : Normal. Cue/PFL is selected as normal, with both a momentary or latched
operation.
Mode 2 : Latched. Cue/PFL is selected as normal, but will only work with a latched
operation.
Mode 3 : Momentary. Cue/PFL is selected as normal, but will only work with a momentary
operation.
Mode 4 : Normal with remotes. Cue/PFL is selected as normal, with both a momentary or
latched operation and will also activate the remotes if the channel is not live.
Mode 5 : Latched with remotes. Cue/PFL is selected as normal, but with only a latched
operation and will also activate the remotes if the channel is not live.
Mode 6 : Momentary with remotes. Cue/PFL is selected as normal, but with only a
momentary operation and will also activate the remotes if the channel is not live.
ON
Mode 1 : Normal.
Mode 2 : Operates as normal, but the remote start function is only activated by the ON
button, and generates a START whenever the button is pressed.
Mode 3 : Always on and no LED indication. The channel cannot be turned o and the On
button LEDs are never active.
Mode 4 : Always on. The channel cannot be turned o.
S2-C6SS 6 WAY STEREO LINE SOURCE SELECT CHANNEL WITH EQ
S2-C6SS 6 WAY STEREO LINE SOURCE
SELECT CHANNEL WITH EQ
10

Table of Contents