Chapter 20 Switcher Setup (Switcher)
1035
Signal Input Settings (Input Menu)
For down-conversion, the image position setting in edge crop mode is the
same as for up-conversion. The value is from –30 to +30 inclusive. For
more details, see “Setting the image position in edge crop up-conversion
mode” (page 1032).
For down-conversion, the enhancer settings are the same as for up-
conversion. For more details, see “Making enhancer settings” (page
1033).
Original image (16:9) Down-converted image (4:3)
Edge Crop
Letter Box 13:9
Letter Box 14:9
Letter Box 16:9
Squeeze
To Next Page
Loading...
