Chapter 11 DME Operations
579
DME Special Effect Operations
2
Set the following parameters.
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
Swirl settings
You can set the amount of swirl, the swirl region, the amount of rotation, and
the swirl center position.
To apply the Swirl effect
With the Swirl menu displayed, set the following parameters.
To make the tip of the swirl stardust
1
Press [Pixel], turning it on.
2
Set the following parameters.
To set the center position of the swirl
1
Press [Position], turning it on.
2
Set the following parameters.
Knob Parameter Adjustment Setting values
1 H Center point in horizontal
direction
–5.000 to +5.000
a)
–20.000 to +20.000
b)
2 V Center point in vertical direction
–4.000 to +4.000
a)
–16.000 to +16.000
b)
Knob Parameter Adjustment Setting values
1 Transition Swirl amount 0.00 to 100.00
2 Center Amount of rotation in center of swirl –8.000 to +8.000
3 Outer Amount of rotation outside of Area –8.000 to +8.000
4 Area Region of swirl 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Density Degree to which image
disappears
0.00 to 100.00
2 Random Trail type and amount of stardust 0.00 to 100.00
To Next Page
Loading...
