EasyManuals Logo

Stryker Neptune 2 Service And Installation Manual

Stryker Neptune 2
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #227 background imageLoading...
Page #227 background image
Specifications*
Model:
Neptune 2 Docking Station
REF:
0702-014-000
Electrical Power
Requirements:
120 V ~, 60 Hz, 3.0 A
15 A receptacle connection
Size:
23 inch [58.4 cm] width
16 inch [40.6 cm] height
23 inch [58.4 mm] depth
Weight:
95 lbs. [ 43 kg]
Equipment Type:
Class I
Enclosure Protection:
IPX0 Ordinary equipment
Infrared Communication Windows:
Protective Earth Ground:
Approval:
CSA International CAN/CSA-C22.2 No. 601.1 M90: 2003
BS EN 60601-1: 1997
UL 60601-1: 2003
Water Requirements:
Pressure Range
50 to 120 psi [2,586 to 6,206 mmHg]
Anti-siphon Device ANSI/NSF-61
Temperature 40 to 110 F [4.4 to 43.3 C]
Connection Source accepts garden hose fitting
and has dedicated shutoff valve
Quality Potable tap water
Usage Nine gallons [34 liters] per rinse cycle at default settings on
standard cycle; water usage fluctuates due to selected cycle and facility flow.
Drainage
Requirements:
Floor drain or permanent service connection per local plumbing codes; 8 feet [2.44 m] connection distance
(maximum)
Water Inlet Hose
0.75 inch [1.9 cm] diameter
6 feet [1.83 m] length
Waste Outlet Hose
1.0 inch [25.4 cm] diameter
6 feet [1.83 m] length
Detergent Inlet Tube 0.25 inch [0.635 cm] outer diameter 4 feet [1.2 m] length
Environmental Conditions: Operation Storage and Transportation
*Specifications are approximate and may vary from unit to unit or by power supply fluctuations.
7-6

Table of Contents

Other manuals for Stryker Neptune 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stryker Neptune 2 and is the answer not in the manual?

Stryker Neptune 2 Specifications

General IconGeneral
BrandStryker
ModelNeptune 2
CategoryMedical Equipment
LanguageEnglish

Related product manuals