Technician Menu Options
Menu Option Displays Detail
System Info
System Info Screen
PN Rover part number
SN Rover serial number
Date Lists current date
Time Lists current time
Software Revs
Software Rev Screen
Small Vacuum
This screen displays the current software revision and
build level for each of the listed circuit boards. The
information will change as software is updated.
Large Vacuum
Valve
Smoke
Canister
Pole
Level
EDMS
Vol Display
Main Control
Docking
Docking Menu
Odometer
Records the total of each type of docking cycle
(quick drain, normal, and extended wash) and the min/max
water flow for the life of the docker.
Control
Magnet Indicates whether the magnet is on or off *
Couplings
Press OK to change the status of the couplings:
extending, extended, retracting, retracted, or error**
Offload Press OK to turn the offload pump on or off
Drain Valve
Press OK to change the status of the drain valve:
opening, open, closing, or closed
Diverter
Press OK to change the status of the diverter:
small, large, or closed.
Water Press and hold OK to turn the water on or off ***
Prefill Press and hold OK to turn the prefill pump on or off
Soap
Press OK to turn the soap injector pump
on or off ****
Docked Press OK to change the docking status to yes or no
* The magnet is activated by the “docked” feature. The magnet setting merely indicated the present magnet status.
** Set the diverter valve to “Large” before extending the couplings. This releases back pressure in the couplers.
*** The water will only flow if the diverter is set to either “small” or “large”. If the diverter is closed the water has no place to go.
**** The soap will not flow through the detergent pump if the diverter is set to closed.
5-18
To Next Page
Loading...
Need help?
General
