Stryker Neptune 2 - Procedure 6.8 - Manually Raising & Lowering Docker Couplers

Procedure 6.8 – Manually Raising & Lowering Docker Couplers
1. Using a 3/16” allen wrench, remove four socket head cap screws (P/N 0004-
638-000). Make sure to remove the electronic ports cover (P/N 0702-014-027)
(BH) before removing top cover in the next step.
2. Slide chassis top cover (0702-014-011) (BE) forward and remove from chassis
assembly.
6-43